Advertisement
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the On/OFF Switch is in the off-position and remove the
Battery pack before performing any procedure in this section.
tO preVent SeriOuS inJury FrOM tOOL FaiLure:
Do not use damaged equipment. if abnormal noise or vibration occurs,
have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BeFOre eacH uSe, inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• damaged electrical wiring
• any other condition that may
affect its safe operation.
2. aFter uSe, wipe external surfaces
of the tool with clean cloth.
accessory Storage and Handling
1. Handle accessories carefully to prevent
dropping or bumping. Do not use wheels
that have been dropped or bumped.
Item 59365
For technical questions, please call 1-888-866-5797.
3. periODicaLLy, wear ANSI‑approved
safety goggles and NIOSH‑approved
breathing protection and blow dust and grit out
of the motor vents using dry compressed air.
4. Li-ion Battery MuSt Be recycLeD Or
DiSpOSeD OF prOperLy.
Do not short, incinerate or open battery.
5. Disconnect battery pack and store battery pack,
charger, and tool in dry, indoor area out of
reach of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
2. Store accessories in shelves, racks, boxes, or
drawers. Keep storage area dry and above
freezing. Any cut‑off wheels exposed to humidity
or freezing temperatures must not be used.
Page 13
Advertisement
