Advertisement
Battery charging
Charge battery pack before using this tool. Follow instructions included
with battery charger. Battery Pack and Charger sold separately.
installing the Battery pack
note: Battery Pack sold separately.
1. With the ON/OFF Switch in the "OFF" position,
insert a fully charged battery pack into the
Battery Receptacle until it clicks in place.
2. to remove, push the latch on the
battery back and slide it out.
Workpiece and Work area Set up
1. Designate a work area that is clean and well‑lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working.
Item 59365
For technical questions, please call 1-888-866-5797.
Battery
receptacle
4. You must use personal safety equipment including,
but not limited to, ANSI‑approved eye and hearing
protection, as well as heavy‑duty work gloves.
5. Before beginning work, provide for sparks
and debris that will fly off the work surface.
Battery pack
Latch
Page 11
Advertisement
