Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Cut-off machines
  5. 2269C-B
  6. Owner's manual & safety instructions

Bauer 2269C-B Owner's Manual & Safety Instructions

3" cut-off tool 20v hypermax lithium
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
For Best results,
use 3.0 amp Hour Battery
or Greater
cut-Off Wheel, Battery and
charger Sold Separately
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22f

Advertisement

loading

Summary of Contents for Bauer 2269C-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    table of contents Safety ................2 Operation ..............10 Specifications ............8 Maintenance .............13 Setup .................8 Warranty ..............16 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    electrical Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. personal Safety 1. Stay alert, watch what you are doing and 7. if devices are provided for the connection of use common sense when operating a dust extraction and collection facilities, ensure power tool.
  • Page 4 cut-Off Machine Safety Warnings 1. the guard provided with the tool must be wheel, position yourself and bystanders securely attached to the power tool and away from the plane of the rotating wheel positioned for maximum safety, so the least and run the power tool at maximum no load amount of wheel is exposed towards the speed for one minute.
  • Page 5 Kickback and related Warnings 5. Do not attach a saw chain, woodcarving Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush blade, segmented diamond wheel with or any other accessory. Pinching or snagging a peripheral gap greater than 10  m m or causes rapid stalling of the rotating accessory toothed saw blade.
  • Page 6 Battery tool use and care 1. prevent unintentional starting. Ensure the 8. Do not expose a battery pack or power tool to switch is in the off-position before connecting fire or excessive temperature. Exposure to fire to battery pack, picking up or carrying the or temperature above 140°F may cause explosion.
  • Page 7 Vibration Safety This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long‑term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration‑related injury. particularly to the hands, arms and shoulders.

  • Page 8: Specifications

    Specifications Bauer 20V Li‑ion: Battery Type 57007 (sold separately) Bauer 20V Li‑ion: Charger Type 57006 (sold separately) No Load Speed n:19,000/min Arbor Hole Diameter 3/8" Cut‑Off Wheel Diameter 3" (Ø  7 6  m m) Min  –   M ax Wheel Thickness 0.030"–  0 .125"...
  • Page 9 Functions On/OFF Switch Battery receptacle cut-Off Wheel (sold separately) arbor Bolt with Flange Wheel Guard assembly Spindle Lock Button Hex Key Item 59365 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the On/OFF Switch is in the off-position and remove the Battery pack before performing any procedure in this section.
  • Page 11 Battery charging Charge battery pack before using this tool. Follow instructions included with battery charger. Battery Pack and Charger sold separately. installing the Battery pack note: Battery Pack sold separately. 1. With the ON/OFF Switch in the “OFF” position, Battery pack insert a fully charged battery pack into the Battery Receptacle until it clicks in place.

  • Page 12: Operation

    1. Make sure that the ON/OFF Switch is in the 5. Avoid contact with foreign objects such as “OFF” position. Insert a fully charged 20  V Bauer metal screws and nails when cutting. Battery Pack (sold separately) into the Battery 6.

  • Page 13: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the On/OFF Switch is in the off-position and remove the Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.
  • Page 14 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly connected. 1. Remove Battery Pack, make sure there are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
  • Page 15 record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Replacement parts are not available for this item. Refer to UPC 193175467607. Item 59365 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.