Instructions for Use Sarpette Instructions for Use Sarpette ® ® Contents Product description Product description Safety instructions • Read instruction manual carefully before use and keep for future reference. Safety instructions • Follow the manufacturer's instructions and instructions for use and maintenance. Description •...
Press the operating button completely. Residues are expelled from the tip. Tip selection Draw the pipette tip 10-15 mm along the wall of the receiver tube. The SARSTEDT Refill Revolution pipette tips provide the best possible combination of pipette and tip for every Phase 5: Discard the used tip by pressing the ejection button (C). application. Use only tips offered by the manufacturer or compatible with them. Further information and a detailed brochure can be found at www.refillrevolution.tips.
Instructions for Use Sarpette Instructions for Use Sarpette ® ® Cleaning Disassembly of the volume unit and replacement of the O-ring, models 5 and 10 ml (Fig. 7) The removed volume unit (lower part) of the pipette can be cleaned with water or alcohol. In cases of heavy soiling, the individual parts can also be immersed in a disinfectant solution.
Repairs and replacement of spare parts do not extend the warranty period. If there are malfunctions that cannot controlled liquids be rectified according to the above instructions, contact your SARSTEDT contact person. Sterilisation The design of the Sarpette M takes into account repeated sterilisation in an autoclave at 121 °C.