Assembling - Zap With Ø76 Adapter Kit - tagarno ZAP STAND Manual

6. ASSEMBLING - ZAP WITH Ø76 ADAPTER KIT
ASSEMBLING | ZAP WITH Ø76 ADAPTER KIT (1/3)
Start by removing the microscope head form your current setup,
using the manufacturer's manual.
OPTION 1: WITH EXTENDED CAMERA ARM
Then, mount the extension block on the camera head by using the
four M4x60 screws (bag 1).
Mount the extension cylinder to the extension block with the two
M4x10 screws (bag 1).
7