Connecting - tagarno ZAP STAND Manual

7. CONNECTING

CONNECTING (1/2)
1. 2.
Connect HDMI cable (1), USB 3.0 cable (2), control box or foot
switch (3), power supply (4) and ESD - Electro Static Discharge (5).
WARNING! Do not use force when inserting the cable plugs.
Wire Description Type
1 Output HDMI Type A
2 USB 3.0 output USB 3.0 Type A
3 Control box or D-SUB 9-Pin
foot switch Female
4 Power supply DC Jack
(DC)
5 ESD Ring Terminal
Connector
* Note: If you're using the foot switch, connect the cable to the foot switch and then connect the footswitch and control box.
3. 4. 5.
Connect to Cable length
Monitor 2700mm
Computer 2700mm
Control box or 3000mm
foot switch
Power socket 3000mm
ESD Grounding 3000mm
point
Connect HDMI cable from the microscope to a monitor.
WARNING! Do not connect the HDMI cable to a PC.
Specification
HDMI out 720p50, 720p60, 1080p25, 1080p30, 1080p50, 1080p60
USB 3.0 Device, Self-powered
Output: 3.3V 330µA
Use only control boxes supplied by TAGARNO
Input: 12V 0.5A
Use only the power supply provided by TAGARNO:
Brand/Model: Mean Well/GEM18I12
Protection class II
Input: 100-240V 0.45-0.2A, 50/60Hz
Overvoltage category ll
Output: 12V 1.5A Max
ESD Grounding point
10