Maykke DT7024 Product Installation

Vanity mirror

Advertisement

VANITY MIRROR
MIRROR
LIMITED LIFETIME WARRANTY
WHAT IS COVERED
All products in the package carry a One-Year Limited Lifetime warranty. This warranty applies only to the original
purchaser and to the original installation of the product.
WHAT IS NOT COVERED
Damage caused during moving or during installation is not a defect or warranty issue and will not be considered as such.
This warranty does not cover product failure caused by abusive treatment, surface scratches, misuse, neglect or damage
due to handling or faulty installations. All wood naturally ages, darkens, changes in color, and mellows over time due
to exposure to light. While this color change is imperceptible from day to day, it may be significant over a long period of
time, or due to amount of light the wood is exposed to. Imperfections such as small surface splits, small dark holes or
darker mineral streaks are natural and are not considered defects.
Toll free Customer Assistance at 877.659.2128
M - F: 7:30AM - 4:30PM PST.
PRE-INSTALLATION
Tools Required
Safety
goggles
Drill
Hardware Included
Part
Description
AA
Anchor / Wood screw
BB
Metal wire
PRODUCT INSTALLATION
AA
PRODUCT INSTALLATION
Phillips screwdriver
Quantity
2
1
1
BB
MODEL: DT7024
DT7224
DT7724
DT7824
DT7936
REV. 111915

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DT7024 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maykke DT7024

  • Page 1 VANITY MIRROR PRODUCT INSTALLATION MIRROR MODEL: DT7024 DT7224 DT7724 LIMITED LIFETIME WARRANTY DT7824 DT7936 WHAT IS COVERED All products in the package carry a One-Year Limited Lifetime warranty. This warranty applies only to the original purchaser and to the original installation of the product.
  • Page 2: Installation

    VANITY MIRROR PRODUCT INSTALLATION PRE-INSTALLATION (continued) Package Contents Part Description Quantity Mirror INSTALLATION Measuring dimensions □ Determine the ideal location for your new vanity mirror. □ Usually the mirror should be a minimum of 1 in. above the faucet. □ Lay the mirror (A) face down on a towel to prevent scratches to the glass or wood frame.
  • Page 3: Positioning The Mirror

    VANITY MIRROR PRODUCT INSTALLATION INSTALLATION (continued) Positioning the mirror □ Place the mirror (A) into the ideal position and mark the corners from the top left and bottom right of the mirror (A). □ Make sure the mirror (A) is centered to the vanity. Threading the wire Loose lark’s head □...
  • Page 4 VANITY MIRROR PRODUCT INSTALLATION INSTALLATION (continued) Hanging the mirror □ Measure 6 in down from the top mark on the wall and 12 in right from the same mark. □ Make sure the mirror (A) is at least 1 in. above the faucet.
  • Page 5: Care And Cleaning

    VANITY MIRROR PRODUCT INSTALLATION CARE AND CLEANING WOOD DOORS AND PANELS Dust cabinets frequently with a soft, lint-free cloth. You may dampen the cloth with water or with a spray-type dust remover. Clean up spills immediately. Use a clean, damp cloth if necessary. Wipe dry with another clean soft cloth. Cloth is better than paper towels for this purpose.
  • Page 6 VANITY MIRROR PRODUCT INSTALLATION This page is intentionally left blank PRODUCT INSTALLATION REV. 111915...

This manual is also suitable for:

Dt7224Dt7724Dt7824Dt7936

Table of Contents