Maykke YSA1133601 Installation, Care Manual And Warranty
Vanity
Hide thumbs
Also See for YSA1133601:
- Installation, care manual and warranty (11 pages) ,
- Installation, care manual and warranty (13 pages)
Table of Contents
Advertisement
Quick Links
www.maykke.com
Installation, Care Guide
and Warranty
Vanity
YSA1133601
YSA1153601
YSA1134801
YSA1153602
YSA1136001
YSA1154801
YSA1144801
YSA1154802
YSA1146001
YSA1156001
YSA1173001
YSA1194801
YSA1183001
YSA1194812
YSA1011801
YSA1001801
YSA1156002
YSA1157202
YSA1157201
YSA1163001
YSA1163002
YSA1197201
YSA1213001
YSA1031801
Advertisement
Table of Contents
Related Manuals for Maykke YSA1133601
Summary of Contents for Maykke YSA1133601
- Page 1 Installation, Care Guide and Warranty Vanity YSA1133601 YSA1153601 YSA1156002 YSA1134801 YSA1153602 YSA1157202 YSA1136001 YSA1154801 YSA1157201 YSA1144801 YSA1154802 YSA1163001 YSA1146001 YSA1156001 YSA1163002 YSA1173001 YSA1194801 YSA1197201 YSA1183001 YSA1194812 YSA1213001 YSA1011801 YSA1001801 YSA1031801...
-
Page 2: Pre-Installation
Round pegs for shelf (for vanities with adjustable shelf) Materials Required Description Quantity Wood screws 2” x 6” lumber (cut to fit between studs) 5/16” Lag Bolts (min. 250lbs) load bearing Washers for Lag Bolts www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016... -
Page 3: Package Contents
□ With a level, draw lines along the studs from the floor to the top of the vanity. These lines will help you spot where to place the screws in Step 3. www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016... - Page 4 Verify the pilot holes are positioned to ensure the lag bolts will engage the 2x6 backing material. □ Secure the vanity to the finished wall with two 5/16” lag bolts and washers (not provided). www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016...
- Page 5 (C), pressing firmly together. □ Secure the sink (D) to the top (C) with the screws. Securing the vanity top (If installing Maykke vanity top) (see fig 4) Fig 4 □ Place the vanity top (C) with the sink (D) over the vanity (A).
-
Page 6: Door Adjustment
Loosening the screw allows the door to move up door or down. Both hinges of the door need to be loosened to adjust the door. Remember to tighten the hinges after the door is in place. www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016... - Page 7 By turning the screw clockwise or counter clockwise it will adjust the depth of the drawer. Adjust the drawer until the face is flush with the vanity frame. www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016...
-
Page 8: Care And Cleaning
Though non-porous, it is not stain, scratch, or heat proof. Spills should be cleaned as soon as possible. Cleaning: For best results use warm water with a small amount of non-abrasive cleaner that does not contain bleach. www.maykke.com INSTALLATION AND CARE GUIDE REV. 05092016... -
Page 9: Warranty
Imperfections such as small surface splits, small dark holes or darker mineral streaks are natural and are not considered defects. Contact support@maykke.com or call toll free 1 (877) 659-2858 M-F 7:30am - 4:30pm (PST) with any questions or warranty concerns www.maykke.com...
Need help?
Do you have a question about the YSA1133601 and is the answer not in the manual?
Questions and answers