LENCO LS-480WD User Manual page 7

Locate the anti-skating weight
You will find a anti-skating weight with small fishing line from the package, please follow below steps to locate the
anti-skating weight:
1. Slip the looped end of the fishing line over the anti-skating weight adjustment stub and into the 3
(the correct anti-skating force for the factory-fitted cartridge).
2. Pull the anti-skating weight slightly to let the tie of the fishing line move to the stub.
3. Lift the anti-skating weight over the anti-skating weight wire support. The anti-skating weight should now be
dangling in free space to the left of support.
The anti-skating force must be adjusted corresponding to the down force as follows:
Down force
2 - 2.5g
2.5 - 3g
3 - 3.5g
3.5 - 4g
Stereo System Connection
RCA Jacks
• The RCA Jacks of this unit are shared as both the Phono output jacks and the Line output jacks. They are
determined by the Phono/Line Switch.
• When used as a line output, the jacks output analog line-level signals and could be connected directly with a
pair of active speakers or the appropriate input of your stereo system. When used as a Phono output, they
should be connected to the phono pre-amplifier or the phono input of the stereo system.
• The Red plug connects with the Right channel and the White plug connects with the Left channel.
Groove in the stub
1 st from bearing rings
2 nd " " "
3 rd " " "
4 th " " "
- 7 -
rd
groove