Keypad Lock (Keyguard) - Nokia 6111 Instructions Manual

Hide thumbs Also See for 6111:
Table of Contents

Advertisement

The phone does not ring for
an incoming call or text
message when
alert
and
Message alert tone
are set to Off. See
p. 48.
The alarm clock is set to On.
See
"Alarm clock"
,
The phone is registered to
the GPRS or EGPRS network.
See
"Packet data"
,
A GPRS or EGPRS
connection is
established.See
data"
p.
53
and
pages"
p. 82.
,
The GPRS or EGPRS
connection is suspended (on
hold), for example, if there is
an incoming or outgoing call
during an EGPRS dial-up
connection.
When the infrared
connection is activated,
the indicator is shown
continuously.
Bluetooth connection
indicator. See
wireless
technology", p. 50.
Push to talk connection is
active or suspended.
See
"Push to talk"
Incoming call
"Tones"
p. 75.
p. 53.
"Packet
"Browse
"Bluetooth
p. 69.
Copyright © 2006 Nokia. All rights reserved.

■ Keypad lock (keyguard)

To prevent the keys from being
accidentally pressed, select Menu,
and press * within 3.5 seconds to
lock the keypad. In the standby mode
close the slide of the phone, and
select Lock to lock the keys.
To unlock the keypad, slide the
phone open, or select Unlock, and
press * or OK, if slide is closed. If the
Security keyguard
the security code if requested.
To answer a call when the keyguard
is on, press the call key, or slide the
phone open. When you end or reject
the call, the keypad automatically
locks.
For
Automatic keyguard
Security
keyguard, see
When the keyguard is on, calls still
may be possible to the official
emergency number programmed
into your device.
Y o u r p h o n e
is set On, enter
and
"Phone"
p. 56.
20

Advertisement

Chapters

Table of Contents
loading

Table of Contents