Aligning The Appliance - Miele K 1911 SF Operating And Installation Manual

Installing the appliance

Aligning the appliance

^ Align the appliance with the custom
front.
The height-adjustable feet at the front
and rear can all be adjusted from the
front.
– Front: with an open-ended wrench
½" (SW 13).
The feet can be adjusted from the
top and bottom e.
5
– Rear: with a /
16
driver via flexible shaft f.
48
" (8 mm) hex nut
A mark is located on the appliance
base and is used as a standard gauge
for height adjustment. When adjusting
the height, align this mark at 1
(32 mm) above the floor.
^ Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
1
dimension 1 /
4
It is very important to comply with
this dimension for the subsequent
alignment of the custom door fronts.
^ Align the custom door with a level.
1
/ "
4
" (32 mm).