Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lisle Digidown
Summary of Contents for Lisle Digidown
- Page 1 ® Digital Tachograph Download Device Operating Instructions...
- Page 2 When in use a suitable SD card must be inserted into the slot in the bottom of the Digidown. To insert the card, push it into the slot in the end of the Digidown until it latches in place. To remove the SD card from the Digidown (for instance in order to read it using a different memory card reader) the protruding end of the memory card should be pushed back into the Digidown.
- Page 3 Doing so may cause file errors on the SD card. Reading the SD card The SD card can be read via the USB port on the Digidown. Once connected to a PC via the USB port, the Digidown will appear as a standard removable disk...
- Page 4 ‘OK’ to cancel the error message. Choice of SD Memory Card The Digidown will work successfully with most types of SD memory card provided that they are formatted FAT16 (which Windows calls ‘FAT’). A few SD card types are unfortunately not suitable as they do not conform fully to the SD card specification.
- Page 5 SD Card Formatting For any SD memory card to work with the Digidown it must be formatted FAT16 (which Windows calls ‘FAT’). When a newly formatted SD card is inserted into a Digidown or Digidown Plus and the unit is connected to a VU, the format of the memory card is first checked.
Need help?
Do you have a question about the Digidown and is the answer not in the manual?
Questions and answers