Lisle Digidown Blue Operating Instructions Manual

Lisle Digidown Blue Operating Instructions Manual

Digital tachograph combined download device with bluetooth upload function

Advertisement

Quick Links

Digital Tachograph Combined Download Device
with Bluetooth Upload Function
Operating Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Digidown Blue and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lisle Digidown Blue

  • Page 1 Digital Tachograph Combined Download Device with Bluetooth Upload Function Operating Instructions...
  • Page 2 Please contact your dealer to discuss the options available. Whilst the Digidown will work correctly with most types of SD memory card (provided that they are formatted FAT16), Lisle Design can only guarantee operation with those memory cards supplied by Lisle Design.
  • Page 3 Insertion and removal of the SD card When in use, a suitable SD card must be inserted into the slot in the side of the Digidown. To insert the card, push it into the slot in the side of the Digidown until it latches in place.
  • Page 4 Successful completion will be indicated by the LED blinking briefly about once every second. Download of data from a driver card direct into the Digidown Blue takes in the region of 1 minute (depending on the tachograph card).
  • Page 5 Mounting Bracket (see diagrams on separate sheet) The Digidown Blue may be supplied with a bracket allowing the unit to be fixed down to a counter or other horizontal surface. A second (smaller) bracket is supplied to cover the memory card slot.
  • Page 6 Larger capacity memory cards are not suitable for use with the Digidown Blue. For any SD memory card to work with the Digidown Blue it must be formatted FAT16 (which Windows calls ‘FAT’).
  • Page 7 Normal Operation – 3 red LEDs: Each of the red LEDs blinking briefly in turn Power is on and Digidown is ready Single LED flashing about twice per second Digidown is busy downloading data Single LED blinking briefly about once every second Successful completion of download ‘All VU’...
  • Page 8 SD card via the USB port then the internal battery is disconnected and power is taken from the VU/USB port. The Digidown Blue is designed to be used with alkaline batteries. A pair of cells will generally be good for downloading tachograph cards some 2000 times before needing replacing.

Table of Contents