Launch X-431 Torque LINK User Manual page 36

LAUNCH X-431 Torque LINK User Manual
Post-Repair report. To facilitate the comparison of the pre-repair and post-repair
reports and get accurate test result, please make sure you saved the right type of
the diagnostic report.
Enter the tester and customer name and then tap OK to save it. All reports
are saved in Report -> Health Reports.
*Note: By default, the workshop information is blank. You can configure and
revise it from Profile -> Settings -> Shop Information. After you configured the
information, it will be automatically generated every time the diagnostic report
is saved. All vehicle and workshop information will be appended as a tag on the
diagnostic report, which allows you to easily retrieve the desired report while
performing the Filter function of Diagnostic Report.
• Compare Results: Tap to select the pre-repair report to compare. By
comparison of the pre- and post- repair reports, you can easily identify
which DTCs are cleared and which remain unfixed.
26