General; References - AXIOMATIC AX030200 User Manual

1. GENERAL

1.1.

References

J1939
J1939/21
J1939/71
J1939/73
J1939/81
TDAX030200
UMAX07050x
NOTE: In order to use the CAN bus, termination resistors are required as per the
standard CAN 2.0B. Ensure that there are 120Ω, 0.25W minimum, metal film (or
similar) resistors on either end of the network. They are to be placed between
the CAN_H and CAN_L terminals, with all ECUs on the network between them.
Version 2.0.3
Recommended Practice for a Serial Control and Communications
Vehicle Network, SAE, January 2005
Data Link Layer, SAE, April 2001
Vehicle Application Layer, SAE, December 2004
Application Layer-Diagnostics, SAE, March 2004
Network Management, SAE, May 2003
Technical Datasheet, 16 Analog I/O, Axiomatic Technologies 2006
User Manual, Electronic Assistant
Technologies, 2006
Preliminary Documentation – May be Subject to Change
®
and USB-CAN, Axiomatic
4-36