MADRIX AURA 2 User Manual page 85

MADRIX AURA User Manual
- State - Shows the current status of the recording process [Started, Stopped].
- FPS - Shows the currently set recording frequency in Frames Per Second.
- Duration - Shows how long the record currently is in HH:MM:SS:FF [hours:minutes:seconds:frames].
- Frame Count - Shows the total number of single frames that has been recorded and created.
- Key Frame Count - Shows the total number of frames that differ from each other. The MADRIX 5 Software
will automatically optimize the file size of records if recorded frames are identical. Hence, the total number of
frames can be different to the number of recorded key frames. For example, a color change [without a fade]
might use only two colors. In this case, the record may have 400 frames in total, but just 2 key frames.
- Buffer Usage - Shows the status of the temporary memory when creating a MADRIX Record. The higher the
progress bar, the more memory is used. You can set the Buffer Size in the Options.
- Memory Usage - Shows the currently used main memory [RAM] when creating a MADRIX Record. You will
receive a warning icon if the recording process is likely to use too much memory with the following tooltip: The
required memory has reached a critical amount in relation to the total physical memory
(RAM)!
§
Left Mouse Click - Click REC a second time in order to stop the recording process.
§
Please wait a few seconds to let the software process the data. You will be asked for the location to store the
record file on your hard driver as well as a name for the file. Click Save in order to confirm.
www.madrix.com
[Part 3] MADRIX 5 Software
//85