Multiple S.a.m.e. County Codes; Choosing An Alert Type (Display, Voice, Or Tone) - Midland WR-100 Owner's Manual

WR-100 Owner's Manual

Multiple S.A.M.E. County Codes:

Press "MENU" button to open menu options.
• Press the "UP" arrow to scroll through menu options until "S.A.M.E.
SET" is displayed, then press "SELECT" button.
• Press the "UP" arrow to scroll through: "SINGLE", "MULTIPLE", or
"ANY."
• Display "MULTIPLE" as explained, then press "SELECT".
"S.A.M.E.01" will be displayed, indicating you will be programming your first
S.A.M.E. County Code at weather radio menu location "01."
• After programming your first S.A.M.E. County Code, press "SELECT" then
the "UP" arrow to advance to "S.A.M.E. 02." Program all of your S.A.M.E.
County Codes in the same way as above.
• When finished entering all your codes, press "MENU" to
close the programming menu.
Choosing an
Choosing an
1. Press "MENU" button to open menu options.
2. Press "UP" arrow to scroll through menu options until "ALT TYPE" (Alert
Type) is displayed, then press "SELECT" button.
3. Press "UP" arrow to scroll through the following (3) alert types: "DISPLAY",
"VOICE", or "TONE".
4. Press "SELECT" to choose the Alert Type you want.
5. Press "MENU" to exit menu programming mode.
Page 9
Alert T ype (DISPLA
Alert T ype (DISPLA
Alert T ype
Alert T ype
DISPLAY
VOICE
TONE
Y , VOICE, OR T
Y , VOICE, OR T
Description of T
Description of T
When the DISPLAY alert type is chosen, only
a text alert will scroll on the display. There
will be no audible alarm.
When the VOICE alert type is chosen, the
alert will sound for 8 seconds, then you will
hear the voice of the weather broadcast for 5
When the TONE alert type is chosen, the
alert tone will sound for 5 minutes, or until
you press any button except the "WEATH-
ER/SNOOZE" button which toggles to the
voice weather broadcast.
www.midlandradio.com
ONE):
ONE):
one Pattern
one Pattern