Page 1
Programming The Midland WR-100 NOAA All Hazards Radio INSERT BATTERIES 1. Turn the Radio over. 2. Remove the cover for the battery compartment by sliding it toward the antenna. 3. Insert three (3) AA batteries. 4. Reinstall the cover for the battery compartment.
Page 2
Programming The Midland WR-100 NOAA All Hazards Radio SET CHANNEL 1. Press the ▲button – “ALARM” appears in the display. This is an alarm clock that will not be programmed. 2. Press the ▲button – “CHANNEL” appears in the display.
Page 3
Programming The Midland WR-100 NOAA All Hazards Radio SET ALERT TYPE and TEST 1. Press the ▲button – “ALT TYPE” appears in the display. NOTE: The radio has three alert types. The “VOICE” alert is suggested. Alert Type Description DISPLAY Only a text alert will scroll on the display.
Page 4
Programming The Midland WR-100 NOAA All Hazards Radio Tone Alerts by the NWS Chanhassen, MN Weather Forecast Office Weather Non-Weather Blizzard Warning Civil Danger Warning Flash Flood Warning Evacuation Immediate Warning Routine Weekly Test Fire Warning Severe Thunderstorm Warning Hazardous Materials Warning...
Need help?
Do you have a question about the WR-100 and is the answer not in the manual?
Questions and answers