Chapter 1 Introduction; Product Overview - Taiwan Commate Computer Inc. P4BEA User Manual

Table of Contents

P4BEA User's Manual

Chapter 1 Introduction

1.1

Thanks for your purchasing the P4BEA motherboard. The new generation, 478-pin

FC-PGA2 motherboard P4BEA supports a full range of the latest generation Intel Pentium

4 processors .The leading edge chipset Intel Brookdale 82C845E MCH and

FW82801DB ICH4 is designed for working with Pentium 4(1.4GHz-2.53GHz), Pentium 4

Celeron, Willamette and Northwood processor in the 478-pin package based on the

VRM 9.0 Spec. And support 400/533 MHz system Data Bus. Built using the leading edge

technology the Intel Pentium 4 processors provide a significant performance over previous

Pentium III processors.

*** WARNING! P4BEA support AGP 2.0 slot for external

AGP 4X mode Graphics Card only.

Two PC2100 DDR SDRAM sockets allow for up to 2.0GB memory capacity. We have

conducted a motherboard compatibility test with a variety of hardware and software, such

as CPUs, memory, display cards, CD ROMs, Novell, MS Office.... etc.

We have set high standards on our quality control, with absolute confidence; we believe

this product is the wisest choice.

This manual is composed of Two sections. The first section is the introduction of this

motherboard, and the second section explains the proper procedure to setup the

motherboard.

Ordering Codes

P4BEA:

ATX Socket 478 Pentium 4 / Celeron Motherboard

with Intel 845E and ICH4 chipset, 533/400 MHz FSB, VGA, LAN,

Audio, USB 2.0 and AGP Interfaces

Table of Contents

Do you have a question about the P4BEA and is the answer not in the manual?