Advertisement
Pico-BLE User manual
AT+CL00\r\n
Low power
working mode
Working Status - Not
Working status - to connect
AT+CL01\r\n
normal
working mode
Whether connected or not
If you feel that the above power consumption is relatively high, you can use 3.3V to directly supply
power to the module, and the current will further
版本：V1.0，日期：2021 年 12 月 16 日
Serial number
Boot moment
Connected
Boot moment
Current
Description
When the chip is powered on, the peripherals
need to be initialized. The instantaneous
current is relatively large, and this time
12mA
is maintained for 300ms, and it enters a
low-power state.
The chip is in normal working state,
broadcasts normally, and is in a periodic
1mA, 5mA
state of sleep, wake-up broadcast, and
alternately
sleep. The purpose is to save power
consumption, the cycle is 500ms. 100ms
broadcast once, 400ms sleep
When the connection is successful, the chip
6mA
will no longer go to sleep. but at work
When the chip is powered on, the peripherals
need to be initialized. The instantaneous
25mA
current is relatively large, this time is
maintained for 300ms, and it enters the 5mA
working state
The chip is always working. Small
6.5mA
fluctuations in current, negligible
8 / 10
Advertisement
