Advertisement
Pico-BLE User manual
Factory reset command： AT+CW\r\n
Please wait five seconds after entering the factory reset command
Set the name and address of bluetooth
AT+BMBLE-Waveshare\r\n
AT+BN112233445566\r\n
AT+BDSPP-Waveshare\r\n
1. After setting the bluetooth name, please reset the module, and use the mobile phone to search
again after reset.
2. The maximum length of the Bluetooth name is 30 bytes
3. After modifying the Bluetooth name, if the device name displayed on the mobile phone does not
change, the main reason may be that you have not modified the Bluetooth address, resulting in the
mobile phone not being updated synchronously. At this time, what you need to do is to change the
pairing information on the mobile phone. Delete and search again, or search with another device.
版本：V1.0，日期：2021 年 12 月 16 日
Set BLE Bluetooth name to "BLE-Waveshare"
Set the address of BLE. The address displayed on the mobile phone is: 66
55 44 33 22 11
Set the SPP Bluetooth name to "SPP-Waveshare"
6 / 10
Advertisement
