Waveshare SIM7600 Series Manual

Introduction
SIM7600X 4G DONGLE is an industrial-grade 4G dongle, which features up to 150Mbps
downlink rate and 50Mbps uplink rate, supports operating systems including
Windows/Linux/Android. By simply connecting it to a laptop, PC, Raspberry Pi, drone,
industrial computer, or other IoT host device, it is easy to use a 4G network connection on
the go.
Features
Supports 2G/3G/4G network connection

Driver provided, for operating systems including Windows/Linux/Android

Supports TCP/UDP/FTP/FTPS HTTP/HTTPS protocols

Supports

TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS
Onboard USB port, for directly connecting with ARM/X86 hosts or other industrial

computers
Onboard UART port with hardware flow control, for connecting with host boards

like Arduino/STM32
Nano SIM card slot; supports 1.8V / 3V nano-SIM card

3x LED indicators, easy to monitor the working status

Portable customized enclosure, mini size, nice looking

Baudrate support: 300bps ~ 4Mbps (115200bps by default)

Baudrate auto-negotiation: 9600bps ~ 115200bps

Hardware Connection
Prepare：

SIM7600X 4G DONGLE

A 4G Nano SIM

Assemble the 4G antenna;

Open the SIM card buckle, pull the SIM card slot according to the arrow as below;

SIM7600X 4G DONGLE
network
card（The card should be workable and 4G accessible）
protocols such as