Microtek Take-it MV320 User Manual page 62

The flash does not fire.
Images or video/audio clips cannot
be played back.
The DV camera cannot delete
images or video/audio clips.
Images or video/audio clips cannot
be played back on TV.
62
A1: Flash function is disabled when shooting video clips.
A2: The flash mode is set to Flash off.
• Select any flash mode except "Flash off".
A1: The Mode is set to the incorrect mode.
• Set the Mode to Playback mode ( ).
A: The SD card is write-protected.
• Set the write-protected tab on the SD card to the unlocked position.
A1: The Mode is set to the incorrect mode.
• Set the Mode to Playback mode ( ).
A2: The "Video Out" setting is set to the incorrect system.
• Enter the Setup mode, set Video Out to "NTSC" or "PAL" depending
on your video output system.
A3: The DV camera is disconnected from the TV set.
• Make sure the video cable is properly connected to both the DV
camera and the TV set.