Vax Home SpotWash Series User Manual page 9

Using the Extra wide 2-in-1 wash tool / Messy clean up tool
For spills, always pick up
the excess liquid before
using water/solution.
Tilt the tool forward onto
the spill and pull back.
Using the crevice tool
Press the trigger on the
crevice tool to release
water and solution.
Using the SpinScrub hand tool
Slide the tool over the tab
at the end of the hose
until it clicks into place.
Press the trigger on the
wash tool to release
water and solution.
Use the brush to agitate
any stubborn stains,
scrubbing back and forth.
Press the trigger on the
spinscrub hand tool to
release water and solution.
Using your machine
Use the brush to agitate
any stubborn stains,
scrubbing back and forth.
IMPORTANT: Over or under tilting the
hand tool may result in poor water
pick up.
Turn the tool over and tilt the
nozzle forwards so the nozzle
is in contact with the surface.
Pull back to recover the water
and solution.
Use the brush in a forwards/
backwards motion to agitate
any stubborn stains.
Tilt the nozzle forward so
the nozzle is in contact
with the surface. Pull back
to recover the water and
solution.
Tilt the nozzle forward so the
nozzle is in contact with the
surface. Pull back to recover
the water and solution.
7