Cleaning And Maintenence - Vax Home SpotWash Series User Manual

Cleaning and maintenence

Emptying and cleaning the dirty water tank
IMPORTANT: Unplug and switch off the machine before performing maintenance or troubleshooting
checks.
The dirty water tank is fitted with a float. When the dirty water tank is full, the float will shut off
the suction on the machine. You will be able to hear if this has happened as the motor noise on the
machine will increase. Once the float is activated, empty the dirty water tank if full.
If the dirty water tank is not full then turn off your machine at the power switch and wait for the float
to settle.
Empty and rinse out the clean water/solution tank and dirty water tank and leave to air dry before
refitting to store.
Press the dirty water tank
release button. Pull to
release the tank and lift by
the carry handle to remove.
40°C
MAX
Rinse the dirty water tank
and lid under water
(max 40°C) to remove
dirt/debris.
8
Pull and lift the lid to
remove from the dirty
water tank.
To refit the lid align the lid
to the tank and firmly push
into place.
Empty the dirty water into
the sink or toilet.
Refit the dirty water tank
onto the machine so it
clicks into place.