Cleaning and maintenance
Removing and cleaning the wash tool and attachments
Press the tool lock button
and pull to remove the tool
from the hose.
40°C
MAX
Rinse the tools, attachments
and the nozzle under warm
water (max 40°C) to remove
dirt/debris.
Cleaning the filter grill
Press the dirty water tank
release button. Pull and lift
to remove the tank.
10
Push the tab up and over
the latch to remove the
SpinScrub tool from the
hose.
To refit the nozzle, slide the
nozzle into the wash tool
until it clicks into place.
Remove any dirt and
debris from the filter grill
located underneath the
dirty water tank.
Pull and lift the clip to
remove the attachment
from the wash tool.
To refit, fit the front of the
attachment into the front of
the wash tool and push the
clip down to click into place.
To remove the nozzle on
the wash tool, push and
lift the clear plastic clip up
over the button on the end
of the hose.