Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vax Home SpotWash Series
Summary of Contents for Vax Home SpotWash Series
- Page 1 VAX SpotWash Home Series Spot Washer User Guide CDSW-MPXP CDSW-MPXA...
- Page 2 • The clean water tank should be filled with warm water (max 40°C) only. Filling the clean water tank with hot or boiling water will damage the machine and invalidate the guarantee. Always use the machine with all water tanks and filters in place. VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK...
- Page 3 Children shall not use, clean or play with this appliance, which when not in use should be secured out of their reach. • Only VAX recommended tools and solution should be used with this machine. Using other solutions may invalidate the guarantee.
- Page 4 Welcome to the Vax family! You are now the proud owner of a VAX SpotWash Home. Here, you’ll find everything you need to know about your machine and, most importantly, instructions on how to get started so that you can get cleaning!
- Page 5 This user guide can be found online at: support.vax.co.uk Operation Press the On/Off button to switch the machine on. † Registration required. Terms and conditions apply, see vax.co.uk for details.
- Page 6 Warranty and technical Warranty If a Vax machine is used in the way it is intended and it breaks down within the guarantee period, it’s our responsibility to repair or replace it. Here’s what isn’t covered: • Functional parts, tools and accessories after 12 months that may suffer premature failure due to every day wear and tear.
-
Page 7: Getting Started
Not suitable for use on water sensitive flooring/surfaces. Only use with VAX Spot Washer Cleaning Solution or VAX Spot Washer Antibacterial Cleaning Solution. Using other solutions may cause excess foaming and will invalidate your guarantee. -
Page 8: Using Your Machine
Using your machine Operation Pull to remove the wash Turn the quick release Plug the machine into the hooks and remove the mains and switch on. tool and hose from the cord from the clips. storage clip. Using the tools Select a tool/attachment. - Page 9 Using your machine Using the Extra wide 2-in-1 wash tool / Messy clean up tool For spills, always pick up Press the trigger on the Use the brush to agitate Tilt the nozzle forward so the excess liquid before wash tool to release any stubborn stains, the nozzle is in contact using water/solution.
-
Page 10: Cleaning And Maintenence
Cleaning and maintenence Emptying and cleaning the dirty water tank IMPORTANT: Unplug and switch off the machine before performing maintenance or troubleshooting checks. The dirty water tank is fitted with a float. When the dirty water tank is full, the float will shut off the suction on the machine. - Page 11 Cleaning and maintenence Cleaning the hose IMPORTANT: Clean the hose after each use to remove any debris or water left in the hose. Empty the dirty water into Press the tool lock button Push the tab up and over Fill a bowl with 500ml of the sink or toilet.
-
Page 12: Cleaning And Maintenance
Cleaning and maintenance Removing and cleaning the wash tool and attachments Press the tool lock button Push the tab up and over Pull and lift the clip to To remove the nozzle on and pull to remove the tool remove the attachment the wash tool, push and the latch to remove the from the hose. -
Page 13: Troubleshooting
Troubleshooting WARNING: Always switch off and unplug the machine before performing any checks or maintenance. There is an accessory missing • Check the contents on the box. Why does the machine have no power? • The plug may not be fully pushed into the electrical socket. •... - Page 14 For how-to videos and warranty registration visit www.vax.co.uk info@vax.co.uk vax.co.uk Vax Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.