Immergas HYDRO 3 V2 User Manual page 67

IDU Display.
The Display function is used to control the on/off state of
the display in the indoor unit.
1) Press regardless of the remote control status (on or
off).
2) When the display of the indoor unit lights up, press
to turn off the light.
ECO operation.
The remote controller sends the ECO signal when the unit
is operating in Cool or Heat mode.
1) Press to send the ECO signal to the indoor unit. The
icon is displayed;
1) Then press , ,
The icon disappears.
Note:
• In cooling mode, when ECO is set up, the Fan Speed is
forced to Auto and the temperature is 26°C; in heating
mode, when ECO is set up, the Fan Speed is forced to Auto
and the temperature does not change.
• Once it has been running for 8 hours,
light up, and the unit will exit the ECO mode.
• The Silent (not on this model) and ECO functions cannot
be implemented at the same time.
34
or to exit the ECO function.
35
will no longer
Follow Me.
1) When the unit is in the Cool or Heat mode, press
at the same time to start the Follow Me function. The
screen will display the
2) The displayed temperature is the room temperature de-
tected by the remote controller.
3) When the Follow Me function is on, press
at the same time to turn off this function, and the
will disappear from the display.
Timer On/Off.
"Timer" is used to set the timed on/off state of indoor unit.
- Timer switch-on:
1) With the appliance in stand-by press
controller will display "Timer On", and "0.0H" will appear
in the timer area.
2) Press to set the number of hours after which the ap-
pliance will turn on automatically with the last adjustments
of the remote control.
3) Once the adjustment is done, the timer information is sent
to the indoor unit.
67
icon.
=
+
Follow me
and
: and the remote
and
36
icon
37