Immergas HYDRO 3 V2 User Manual page 59

4
PARAMETER SETTINGS
/ USE
4.1 PRECAUTIONS WHEN INSTALLING THE
REMOTE CONTROLLER.
Installation
4.1.1 SAFETY CONSIDERATIONS.
1. Installation Precautions
Please read this "Safety Considerations" carefully before
installing Controller and be sure to install it correctly. After
Safety Considerations
completing the installation, make sure the controller oper-
Installation
Please read this "Safety Considerations" carefully before installing
ates properly.
Controller and be sure to install it correctly. After completing the
Please instruct the customer how to operate the controller
installation, make sure the controller operates properly.
1. Installation Precautions
and how to perform maintenance.
Please instruct the customer how to operate the controller and how to
Safety Considerations perform maintenance.
4.1.2 MEANING OF CAUTION SYMBOLS.
Please read this "Safety Considerations" carefully before installing
Meaning of Caution Symbols
Controller and be sure to install it correctly. After completing the
installation, make sure the controller operates properly.
Failure to observe these instructions properly may
Failure to observe these instructions properly may result in
Please instruct the customer how to operate the controller and how to
result in property damage or personal injury.
property damage or personal injury.
perform maintenance.
Information classified as NOTE contains instructions to
Information classified as NOTE contains instructions to ensure proper
Meaning of Caution Symbols
ensure proper use of the controller. use of the controller.
• Ensure that nothing interrupts operation of the wireless remote
•Ensure that nothing interrupts operation of the
Failure to observe these instructions properly may result in
controller.
wireless remote controller.
property damage or personal injury.
• Ensure that the signal from the remote controller can easily be
•Ensure that the signal from the remote controller
transmitted.
Information classified as NOTE contains instructions to ensure proper
• Ensure that the operation display lamp and other indicator
can easily be transmitted.
use of the controller.
lamps can easily be seen.
• Ensure that nothing interrupts operation of the wireless remote •Ensure that the operation display lamp and other
• Ensure that there is neither a source of light nor a fluorescent
controller.
indicator lamps can easily be seen.
lamp near the receiver.
• Ensure that the signal from the remote controller can easily be
•Ensure that there is neither a source of light nor
• Ensure that the receiver is not exposed to direct sunlight.
transmitted.
a fluorescent lamp near the receiver.
• Ensure that the operation display lamp and other indicator
lamps can easily be seen. •Ensure that the receiver is not exposed to direct
• Ensure that there is neither a source of light nor a fluorescent
sunlight.
lamp near the receiver.
• Ensure that the receiver is not exposed to direct sunlight.
4.1.3 PRECAUTIONS IN HANDLING REMOTE
CONTROLLER.
• Direct the transmitting part of the remote controller to the
receiving part of the air conditioner (Fig. 19).
• If something blocks the transmitting and receiving path
of the indoor unit and the remote controller as curtains, it
will not operate.
• Transmitting distance is approximately 7 m.
• 1 short beeps from the receiver indicates that the transmis-
sion is properly done.
• Do not drop or get it wet.It may get damaged.
• Never press the button of the remote controller with a hard,
pointed object.
The remote control may break.
4.1.4 INSTALLATION SITE.
• It is possible that signals will not be received in rooms that
have electronic fluorescent lighting. Please consult with the
salesman before buying new fluorescent lights.
• If the remote controller operated some other electrical
apparatus, move that machine away or consult your dealer.
59
19