Quick Start-Up - Microtek ScanMaker 3600 User Manual

Quick Start-up

Scanning sequence is done in five easy steps.
Step 1. Install Microtek ScanWizard 5
Step 2. Position your original material
Step 3. Launch ScanWizard 5
Step 4. Scan your material
Step 5. Save your scan material
Step 6. Exit ScanWizard 5
Step 1. Install Microtek ScanWizard 5
Install the ScanWizard 5 scanner driver (included in your Microtek CD-
ROM) as instructed in the Installing and Getting Started booklet
(a separate document that came with your scanner package).
For ScanWizard 5 to work properly after installation, the correct scanner
model should be properly connected to your host beforehand and it needs
to be "powered on" before launching the software.
Step 2. Position your original material
Place your material face down on the scanner bed.
Step 3. Launch ScanWizard 5
A. Launching ScanWizard 5 as a stand-alone program
Double-click the ScanWizard 5 icon
B. Launching from an image-editing application
Windows: Go through the Windows menu - click Start, Programs,
Image-editing software.
on your desktop; or