E-Mail Button; Copy Button; Ocr Button - Microtek ScanMaker 3600 User Manual

E-mail button

ScanWizard 5 automatically attaches the scanned image to your E-mail
message.
Point the cursor on the Scan or Scan to (whichever was activated
previously) button for a moment, then click and hold the button. Select E-
mail from the drop-down menu.
The Save As dialog box appears and prompts you to save the file to your
folder and key in a file name. It is recommended that you use either .jpg or
.bmp as the file format.
Make sure that the check box "Send document to application after saving"
has been selected/checked.
Make sure your preferred E-mail application is selected from the listed
options.
Click Save to launch your E-mail editor with the attached image, then start
typing your message and hit the Send button.

Copy button

Point the cursor on the Scan or Scan To button, then click and hold the
button for a moment. Select Copy from the drop-down menu.
When the Copy dialog box appears, select your default printer or any
alternative printer from the options, then specify the number of copies to be
made. When you are ready to print, click OK to create a copy of the
scanned material directly on your default printer.
The function of the Copy button is similar to the E-mail and OCR buttons.

OCR button

Point the cursor on the Scan or Scan to button, then click and hold the
button for a moment. Select OCR from the drop-down menu.
When the Save As dialog box appears, key in a file name, then select .rtf,
.txt, .xls, .htm, and pdf as the export file format.
Make sure that the check box "Send document to application after saving"