tams elektronik
Connecting the track sections
The busy status can only be reported trouble free, if one conductor is isolated at both ends of
each section to be monitored:
3-rail systems: centre conductor or both rails
2-rail systems (analogue): "-" rail
2-rail systems (digital): one of the two rails
Please note that, due to the principle, in analogue 2-rail systems (DC systems) only vehicles
are detected that enter the track section in the direction marked as "direction of travel" in the
connection diagram.
GBM-8.2
G1, G2, G3, ... G8
V1
Monitoring of switched-off track sections
Track sections that are to be switched off during operation (e.g. in a staging yard) can also be
monitored with the GBM-8.2. For this purpose, a resistor with a value < 1.5 kW must be
installed in the supply line to the track section concerned in such a way that it bridges the
switch in the switched-off state.
3.2.
Connection to
isolated conductors in the track sections
uninterrupted conductor
GBM-8.2
Connections GBM-8.2 | 9