Part Names And Functions Of The Remote Controller - Toshiba MMY-SUG1001MT8P-E Owner's Manual

Concealed Duct High Static Pressure Type
MMD-UP018✱H✱ - MMU-UP056✱H✱
Drain pan
MMD-UP072✱H✱ - MMU-UP096✱H✱
Drain pan
Slim Duct Type
MMD-UP✱✱✱✱SPH✱
Air discharge
Under Ceiling Type
MMC-UP✱✱✱✱H✱
17-EN
Air discharge
Connect a discharge duct.
Electrical control box
The earth screw is provided in the
electrical control box.
Air intake
Air filter
Air discharge
Connect a discharge duct.
Air intake
Connect a suction duct.
Earth screw
Equipped on the electrical control box.
Earth screw
Equipped on the electrical
control box.
Air intake
Horizontal louver / Vertical grille / Air changed.
The air discharge direction can be discharge.
Air intake grille
Air is taken in through here.
Earth screw
Inside the electrical box.
Air filter
Filters out dust.
(Behind the air intake grille)
– 9 –
3
Part names and functions of the remote
controller
Remote controller model name : RBC-ASCU11-E
LCD backlight lights for 15 seconds during remote controller operation.
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
■
Operations
4 3
1
ON/OFF button
Turns on the unit when pushed, and turns off when pushed again.
2
Setting button
Sets setting temperature at the normal mode.
Changes each setting at the Operation mode, the Fan speed mode or the Wind direction mode.
3
OFF timer button
Setting the OFF timer.
4
Menu button
Selects the Operation mode select, the Fan speed select or the Wind direction select.
Each time you push the button, indicator is displayed as followings.
• The Fan speed select or the Wind direction select is not displayed depending on indoor unit models.
Normal Operation
operation
mode
Operation lamp
Lights during operations.
Blinks when a check occurs or the
protective device activates.
2 1
Fan Wind
mode speed direction
select select select
18-EN