Part Names; Part Names And Functions Of The Remote Controller - Toshiba MMD-UP0961HFP-E1 Owner's Manual

2

Part names

■
Fresh air intake unit Indoor Unit
MMD-UP048*HFP*
MMD-UP072*HFP* to UP128*HFP*
13-EN
─ 7 ─
Air discharge
Connect a discharge duct.
Air intake
Connect a suction duct.
Electrical control box
The earth screw is provided in the
electrical control box.
Drain pan
Air discharge
Connect a discharge duct.
Air intake
Connect a suction duct.
Electrical control box
The earth screw is provided in the
electrical control box.
Drain pan
3
Part names and functions of the remote
controller
LCD backlight lights for 15 seconds during remote controller operation.
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
■
Operations
4 2
1
ON/OFF button
Turns on the unit when pushed, and turns off when pushed again.
2
Setting button
Sets setting temperature at the normal mode.
Changes each setting at the Operation mode, the Fan speed mode or the Wind direction mode.
3
OFF timer button
Setting the OFF timer.
4
Menu button
Selects the Operation mode select, the Fan speed select or the Wind direction select.
Each time you push the button, indicator is displayed as followings.
Normal
operation
mode
Operation lamp
Lights during operations.
Blinks when a check occurs or the
protective device activates.
1
Operation Fan
mode speed
select select
14-EN