Related Manuals for Mitsubishi Electric Mr. SLIM PEAD-M50JAA(D)
Summary of Contents for Mitsubishi Electric Mr. SLIM PEAD-M50JAA(D)
- Page 1 <ORIGINAL> Air-Conditioners PEAD-M50, 60, 71, 100, 125, 140JAA(D) OPERATION MANUAL FOR USER English For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
-
Page 2: Table Of Contents
- It may also be in violation of applicable laws. Incomplete combustion may result. - MITSUBISHI ELECTRIC CORPORATION cannot be held • Do not remove the front panel or the fan guard from the outdoor responsible for malfunctions or accidents resulting from the use of unit when it is running. the wrong type of refrigerant. -
Page 3: Parts Names
2. Parts Names ■ I ndoor Unit PEAD-M·JAA(D) Fan steps 3 steps Vane – Louver – Filter Normal Filter cleaning indication – ■ W ired Remote Controller Controller interface The functions of the function buttons change depending on the screen. Refer to the button function guide that appears at the bottom of the LCD for the functions they serve on a given screen. When the system is centrally controlled, the button function guide ⑤ that corresponds to the locked button will not appear. Main display Main menu Main Main menu Vane·Louver·Vent. (Lossnay) High power Room Timer Cool Set temp. - Page 4 2. Parts Names Display The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.) <Full mode>...
- Page 5 2. Parts Names ■ W ireless Remote-Controller (option) SET TEMPERATURE button SET TEMPERATURE button ON/OFF button CHECK TEST RUN sets and any desired room MODEL SELECT Pushing button starts operation. temperature. Pushing again stops operation. NOT AVAILABLE FAN SPEED button AUTO STOP/AUTO START button TEMP ON/OFF This button is used to set fan Used for selecting timed starting speed to low, medium or high.
-
Page 6: Operation
3. Operation ■ A bout the operation method, refer to the operation manual that comes with each remote controller. 3.1. Turning ON/OFF 3.1.1. For wired remote controller [ON] [OFF] Press the [ON/OFF] button. Press the [ON/OFF] button again. The ON/OFF lamp will light up in The ON/OFF lamp will come off, and green, and the operation will start. the operation will stop. - Page 7 3. Operation Information for multi system air conditioner (Outdoor 3.3.2. For wireless remote controller unit: MXZ series) ► T o decrease the room temperature: Press button ③ to set the desired temperature. ► M ulti system air conditioner (Outdoor unit: MXZ series) can The selected temperature is displayed 3. connect two or more indoor units with one outdoor unit. • Each time you press the button, the temperature value decreases by 1 °C. According to the capacity, two or more units can operate simultaneously.
- Page 8 3. Operation 3.5. Ventilation (For wired remote controller) <Display of unsupported functions> 3.5.1. Navigating through the Main menu Title The message at left will appear <Accessing the Main menu> if the user selects a function not Not available supported by the corresponding Main Main menu Unsupported function Press the [MENU] button. Vane·Louver·Vent. (Lossnay) indoor unit model. The Main menu will appear.
-
Page 9: Timer
4. Timer ■ T imer functions are different by each remote controller. ■ F or details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller. 4.1. For wireless remote controller 1) Set the current time ① Press the CLOCK button using a thin stick and blink the time Ⓐ . ②... -
Page 10: Trouble Shooting
7. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Air conditioner does not heat or cool well. ■Clean the filter. (Airflow is reduced when the filter is dirty or clogged.) ■Check the temperature adjustment and adjust the set temperature. ■Make sure that there is plenty of space around the outdoor unit. -
Page 11: Specifications
7. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Noise is louder than specifications. ■The indoor operation sound level is affected by the acoustics of the particular room as shown in the following table and will be higher than the noise specification, which was measured in an echo-free room. - Page 12 Please be sure to put the contact address/telephone number on this manual before handing it to the customer. HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN VN79D606H03...