Page 1
TECHNICAL MANUAL RCW4 vs RCW3 Wiring RCW4 vs RCW3 Object : This bulletin is explaining the method to connect mix wired remote controller RCW4 (accessory code 7ACEL1613) vs RCW3 (part code G30294219_K51264). RCW3 RCW4 Février 2017...
Page 2
Method : Reminder : Wired remote RCW3 Wired remote RCW4 Quantity by installation = 1 Quantity by installation = 1 per indoor unit For the wiring, it is requested to order cable G40113325. Quantity by installation = 1 per indoor unit...
Page 3
Wiring : SETTING OF WIRED REMOTE CONTROLLERS RCW3 & RCW4 RCW3 setting All the remote RCW3 must set separately ! Step 1 : RCW3 is OFF status. Hold simultaneously “Function” and “mode“ during 5 Step 2 : secondes till hearing a Bip sound.
Page 4
RCW4 is OFF status. Start automatic addressing hold simultaneously “Mode“ Step 2 : & “Thu“ buttons during 5 secondes. Step : Addressing procedure is requesting about 10 minutes and will end when on the RCW4 will display all indoor units addresses.
Need help?
Do you have a question about the RCW4 and is the answer not in the manual?
Questions and answers