Table of Contents
Advertisement
CAUTION:
Eye protection should be worn for this procedure.
Procedure
Step 1.
Drain the water from the heat exchanger completely (see
page
37).
Step 2.
Hold the heat exchanger in place with two people, and remove the three screws that secure the top
hinge bracket to the heat exchanger.
Figure 50. Removing the top hinge bracket
Step 3.
Hold the heat exchanger with three people on the handles/spots as illustrated.
"Drain the heat exchanger of water" on
.
Chapter 4
Rear Door Heat eXchanger V2 replacement
45
Advertisement
Table of Contents
