Getting Ready; Loading The Battery - Microtek MN100 Operation User's Manual

Getting Ready

BATTERY
compartment
Slide toward
"OPEN" to unlock
_ _ _ _ _
+ + + + +
Correct battery polarity at outer end of
the compartment are indicated at the
back of cover or as illustrated above.
Slide toward
arrow direction
to open
+ + + + +
_ _ _ _ _
A. Loading the Battery
(4 AAA size batteries, Alkaline recommended)
1 Unlock the battery compartment cover by
sliding its lock toward "OPEN" position.
2 Slide compartment cover outward (as
indicated by the arrow shown on top of the
cover) and open the cover.
3 Insert each of the 4 AAA batteries into its
chambers making sure that the positive (+)
and negative (-) ends are properly oriented
with the polarity indicated on top of each
chamber and at the back of the cover.
4 Close and slide the battery compartment
cover back to its original position and lock
the cover.
WARNING : When the LCD Panel display
starts to blink, it indicates that the batteries
power is low. Stop taking pictures and transfer the
images data to your PC within a week before the
batteries completely lose its power. Otherwise, all
the images will be erased.
4