Continuous Shooting Mode - Microtek MN100 Operation User's Manual

C. Continuous Shooting Mode
Continuous Shooting
mode is ON when this
LCD Panel displays
the " CL CL " icon
CL CL CL
Repeatedly press this Function Mode
button until the Continuous Shooting
mode icon is displayed
This mode of operation allows you to take
multiple frames of images when holding
down the Shutter button while aiming at
your subject. A maximum of 20 or 80
shots can be taken depending on which
shooting mode you are in. Continuous
shooting under 20 Shots mode takes about
1.5 seconds to fully consume the 20
frames, while it takes about 6.5 seconds
under 80 Shots mode. If you release the
Shutter midway, only part of the available
frames will be loaded with images.
To set camera into Continuous Shooting
mode, repeatedly press the Function Mode
select button until the "
displayed on the LCD Display Panel.
8
" icon is
CL CL CL
CL CL