20 Shots Mode - Microtek MN100 Operation User's Manual

B. 20 Shots Mode
This mode of operation allows you to take 20 shots of images at higher resolution
CIF (352 x 288) format. The camera default to this mode. To set your camera back
to 20 Shot mode after operating in 80 shots mode-
1 Repeatedly press the Function Mode button until the "Hr
LCD Display Panel.
2 Press the Shutter button and the "Hr
that the 20 Shot mode is ready.
WARNING: Switching from 20 pictures mode to 80 pictures modes will erase any images
in the camera. Please download current images before switching modes. (See section on
"Erasing Images from the Camera" in this manual).
If you attempt to continue shooting at the end of 20th shot, a repetitive beep will emit when
you press the Shutter button.
20 Shots mode is
ready only when the
LCD Panel displays
20 20" icon 20 20
the "20
Repeatedly press this
Function Mode button
until the "Hr Hr" icon is Hr Hr
Hr
displayed
Hr Hr Hr
Hr" icon becomes "20
7
Hr Hr Hr
Hr" icon is displayed on the
20 20" which would indicate 20 20
When the "Hr
appears on the LCD
Panel, press Shutter to
display the "20
Hr Hr" icon Hr Hr
20 20" icon 20 20