Connecting The Camera To Pc - Microtek MN100 Operation User's Manual

Connecting the Camera to PC

NOTE : It is assumed that you have already installed the bundled software into your
computer. If not, install software as instructed in the section on "Utility Software Installation"
of this manual.
To transfer (download) the images data from the
camera to your PC, connect the camera to your
PC with the supplied USB cable.
1 Insert the smaller terminal of the USB cable
into the camera's USB port.
2 Plug the other end of the USB cable into the
USB port of your computer.
3 Perform downloads to your PC by referring
to the section on Downloading images later
in this manual.
4 Operate the camera as web camera by
referring to the EyeStar Mail User's Manual
provided in the MN100 utility CD.
11