“Vinkor” type pot core inductors. More than often this type of products has these expensive inductors replaced with generic ferrite core ones or, even worst, the mid band dual inductor replaced with a single one. Never in Heritage Audio products!!, as the impact of replacing these to the eq curves is dramatic, leading to incorrect curve´s shapes and high frequency phase distortion which in no way honor the design.
GETTING STARTED FRONT D.I. INPUT PHANTOM POWER SWITCH MIC PAD BUTTON INPUT GAIN SWITCH HI SHELF at 12kHz High Impedance Class A JFET Activates 48 V 20 dB Reduction Ahead of Input 5 dB Steps From 30 to 80 Boost or Cut up to 15 dB at 12 Transformer MID BAND FREQUENCIES LOW SHELF FREQUENCIES...
APPLICATIONS CONDENSER MIC - L ACTIVATE +48 V FOR CONDENSER MIC USB - COMPUTER CONDENSER MIC - R MIC INPUT 1 MIC INPUT - 2 MIC INPUT 2 OUTPUT - 1 OUTPUT -2 LINE INPUTS - AUDIO INTERFACE D.I. D.I. INPUT 1 USB - COMPUTER D.I.
TROUBLE SHOOTING PROBLEMS SOLUTIONS There doesn´t appear to be any signal at all arriving at the Make sure the GAIN knob is not in the ´Off´ position. back XLR. There still doesn´t appear to be any signal at all arriving at Check to see if a jack cable has been left plugged into the the back XLR.
2 years to the original purchaser. In the event of such defects, the product will be repaired without charge or, at our option, replaced with a new one if delivered to Heritage Audio prepaid, together with a copy of the sales slip or other proof of purchase date.
Need help?
Do you have a question about the ELITE Series and is the answer not in the manual?
Questions and answers