Using The Camera - Motorola PIP1000 CONNECT User Manual

Using the Camera

3.
3.1 Setting Up
Place the Camera in a convenient location (e.g. on a table) and
point the camera lens towards the area you want to monitor.
NOTE
Do not place the Camera within the baby's reach! If there is inter-
ference with the picture or sound, try moving the units to different
locations, and ensure they are not close to other electrical equipment.
3.2 Night Vision Mode
The Camera has 8 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor on the front of
the camera detects a low level of ambient light, the LEDs will
automatically activate and the screen on your smart phone will
display in black and white.
3.3 Talk Mode
The camera has a built-in speaker. By operating on the Motorola
Nursery app installed in your smart phone, you can talk to your
baby through your smart phone.
3.4 Lullaby, Audio Book and Personal Sound Recording
The camera has a built-in speaker. By operating on the Motorola
Nursery app installed in your smart phone, you can operate the
camera to play lullabies, audio books and your personal sound
recordings.
3.5 Temperature Display (HH °C / °F or LL °C / °F)
is a temperature sensor at the back of the camera. By operating
on the Motorola Nursery app installed in your smart phone, you
can monitor the environmental temperature at where the camera
is placed.
Using the Camera
There
9