Table of Contents
Advertisement
4.5.4 Trouble removal
Trouble
The power switch
is not working
Belt conveyor is
not working.
Belt conveyor off
tracking or belt
loose
4.6 Cleaning
4.6.1 It is important to keep the appliance clean and in good working condition to ensure
optimum quality of the products and long life of the appliance.
4.6.2 Never immerse the appliance in water or other liquids.
4.6.3 To clean the motor housing, unplug the appliance and clean with a damp cloth or
sponge with some mild soap solution. Dry with a dry cloth.
4.6.4 Never use abrasive sponges or detergents, steel wool or metal utensils to clean the
interior or exterior parts of the appliance.
WARNING: Take care during cleaning when handling the rollers due to its sharp edges.
Wear protective gloves (not supplied) if necessary.
4.7 Storage
4.7.1 Before reassembling, make sure that all parts are dry. Before storing, remove all
residues from the appliance (incl. the basins), disconnect it from the supply and
clean the appliance and its accessories thoroughly. Use white Vaseline oil (or any
similar product) to protect all parts of the device.
4.7.2 To protect the appliance from dust, cover it with a cloth that allows air circulation
inside the appliance.
Possible cause
Power plug is not inserted
correctly.
Front cover assembly is
not locked, the magnetic
switch is not connected.
speed control knob is at the
"0" position
The screw under the belt is
loosen, or belt is worn.
Remedy
Connect the power plug to a socket
outlet.
Lock the front cover correctly, and make
the magnetic switch connected.
Turn speed control knob clockwise to
adjust speed
Adjust the two screws, make the belt is
on the right track, or replace new belt.
Advertisement
Table of Contents
