Table of Contents
Advertisement
4.2 The manufacturer will be not responsible for following cases:
4.2.1 If the machine is tampered with or safety functions are installed by non-authorized
staff.
4.2.2 If the components are replaced by unauthorized parts.
4.2.3 If the instruction in this manual is not carefully followed.
4.2.4 If the machine surfaces are treated with unsuitable substance or solvent.
4.3 Safety devices
4.3.1 Micro-switch: The micro-switch is equipped with a magnet mechanism. The
appliance stops automatically when the upper lid or the outlet lid is opened during
operation.
4.4 INSTALLATION
4.4.1 Packing and unpacking
4.4.1.1
Remove all packaging materials. Keep the packaging for future storage.
4.4.1.2
Ensure the packages you received includes following items: multi slicer machine,
plastic container, instruction manual.
4.4.1.3
After unpacking all accessories, lay them on a flat and stable surface.
4.4.1.4
Make sure the delivery contents are complete and free of any damage. If you find
that parts are missing or show damage, do not use the appliance but contact
your dealer.
4.4.1.5
Clean the feeder, front cover assembly, conveyor, pressing assembly, S blade,
middle shell, and other parts which contact with vegetable.
BE CAREFUL: the cross knife is sharp. (Use gloves if necessary, not included)
4.4.1.6
Position the appliance in such a way that the plug is always accessible.
4.4.2 Installation area
The selected machine work setting must be sufficiently lit and have an electric power outlet.
The workplace must be sufficiently large, perfectly level and dry. The machine should be
installed in non-explosive environments. In any case, installation should be carried out by
taking into account any applicable industrial safety regulations in force.
4.4.3 Assembling instructions
Attention: Always unplug the appliance from the electrical power outlet before starting
assembling or disassembling.
4.4.3.1 Place the machine on a steady and flat table.
4.4.3.2 Make sure the switch is on "OFF" position.
4.4.3.3 Install the front cover assembly with middle shell, lock the fastener.
4.4.3.4 Install the pressing assembly, and lock the locked cover.
Advertisement
Table of Contents
