Graco 4EVER DLX EXTEND2FIT Instruction Manual page 124

Lap Belt Installation - DO NOT use in Booster Mode
Always review your vehicle owner's manual for specific information about
your vehicle seat belts.
Grab the sides of the
seat at the belt path
and slide the seat
side-to-side and front-
to-back. The seat
should not move more
than 1 " (2.5 cm).
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 124 NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 124
Locking Latch Plate and No Retractor
When installing the car seat, route the lap seat
belt through the proper path and buckle it in.
Then, pull upwards on the tail of the belt so that
the lap belt gets tight around the car seat.
Sewn On Latch Plate and ALR
Slowly pull the lap belt all the way out. Route
the vehicle seat lap belt through the proper belt
path and buckle it in. Then, pull the lap belt tight
while feeding all the slack back into the retractor.
124
8/28/20 3:50 PM 8/28/20 3:50 PM