Related Manuals for LOCKLY GUARD VISION DUO
Summary of Contents for LOCKLY GUARD VISION DUO
- Page 1 WWW.LOCKLYPRO.COM PGD698D / PGD698L FOR COMMERCIAL USE & PROFESSIONAL INSTALLATION VISION DUO (698D) INTERCONNECTED EDITION VISION (698L) LATCH EDITION USER MANUAL ( a p p l i c a t i o n i n p r o g r e s s )
-
Page 2: Table Of Contents
Table of Contents Section 1 - Product Highlights 4.5 Locking/Unlocking with App 4.6 Unlock with QR Code 1.1 Product Features 4.7 Locking/Unlocking with Door Handle 4.8 Safe Mode - Overview Section 2 - Product Overview 4.9 Rain Mode 4.10 Shine Mode 2.1 Product Overview - Exterior 4.11 Welcome Mode 2.2 Product Overview - Interior... -
Page 3: Product Features
1.1 Product Features Video Monitoring and Recording See who's at your front door with Live View camera streaming, real-time high-resolution video from your smartphone. Video recordings are stored locally with no monthly fees. Patented Hack-Proof PIN Genie Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. -
Page 4: Product Overview - Exterior
2.1 Product Overview - Exterior Video Camera Microphone RFID Card Reader Keypad Buttons Touchscreen Welcome/Safe Mode Battery Indicator OK Button Bluetooth Icon Fingerprint Sensor Doorbell Button Video Doorbell Light Indicator Speaker Exterior Handle Key Hole Key Hole Cover 9V Battery Backup Socket Reboot SECTION 2.1... -
Page 5: Product Overview - Interior
2.2 Product Overview - Interior Battery Cover Screw Battery Cover Battery Compartment Operated by 2 x 4 x AA Alkaline Batteries (Included) Program Button Reset Button Low Battery Indicator/ Door Lock Button Interior Handle SECTION 2.2... -
Page 6: Understanding Your New Lock
™ For any questions you can always visit http://Locklypro.com/help for assistance. Don’t forget that in order for Lockly Guard™ Vision, to work with full features, it is required to pair it with the Locklypro App available for both iOS and Android smart devices. -
Page 7: Rebooting Your Lock
Lockly Guard will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly Guard lock. The reboot button is located in the middle of the two 9V battery backup sockets. -
Page 8: Low Battery
2.5 Low Battery When the battery is in seriously low condition, Lockly Guard will make continu- ous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. -
Page 9: Changing The Battery
2.6 Changing The Battery Under normal use, the Lockly Guard battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. -
Page 10: Configuring Access
NOTICE The Default Access Code is Your new Lockly Guard Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 33 sets of Access Codes can be stored for use at any given time. -
Page 11: Entering Programming Mode
3.2 Entering Programming Mode To enter Programming Mode, remove the battery compartment cover on the interior side of the Lockly Guard to expose the Program buttons. Simply press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. -
Page 12: Pairing To A New Mobile Device
To pair your smart lock to a new mobile phone, download the LocklyPro app on your new mobile phone then use the same account to login to your LocklyPro App on the new mobile device. If you're pairing your Lockly Guard to a new LocklyPro app account, follow the steps below 1. -
Page 13: Adding An Access Code
3.4 Adding an Access Code Enter the App Access Management settings then tap "Add New User". Select the the type of user you wish to add access, “Trusted User”, “Guests”, “One-Time Access”. For example, select Trusted User, enter the user’s name and set the Access Code. -
Page 14: Adding A Fingerprint
Not OK Not OK Your Lockly Guard can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you without using the app. -
Page 15: Adding/Deleting Fingerprints
3.7 Adding/Deleting Fingerprints Fingerprints can only be added or deleted through the App. On the App Access Manage- ment, select Fingerprint, then tap "Add New Fingerprint". Scan your finger by lightly placing your desig- nated finger on the sensor until you hear a beep. -
Page 16: Fingerprint Scanning Directions
3.8 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. -
Page 17: Fingerprint Scanning Tips & Troubleshoot
3.9 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more than a second until you hear a beep. •... - Page 18 3.10 Adding an RFID card (Continued) The Lockly Guard keypad will lit up and show the number sequence of the RFIDs to be added. Place the card into RFID card reading area. • After the RFID card is successfully added, the keyboard will display PASS, and then give a long "beep".
-
Page 19: Checking/Deleting An Rfid Card
RFID card. 4.1 Unlocking with Access Codes Lockly Guard Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or RFID card. - Page 20 Ten consecutive wrong attempts will put Lockly Guard in “Safe Mode”. (See Section 4.8) Lock your Lockly Guard by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings.
-
Page 21: Unlocking With Fingerprints
4.2 Unlocking with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.7. If your fingerprint is registered and acknowledged, you will hear a “beep”... -
Page 22: Unlocking With Rfid
4.3 Unlocking with RFID Push down the handle and open the door after it chimed. Place your RFID card closer to the panel. 4.4 Locking/Unlocking with Physical Key Exterior View To unlock your lock using the physical key (included), open the key cover on the handle by turning the cover to reveal the keyhole. -
Page 23: Locking/Unlocking With App
4.5 Locking/Unlocking with App You must have the LocklyPro iOS or Android app installed in order to lock and unlock with smartphone. Please download the app by visiting the link below or search “LocklyPro” from the correct app store. Scan or visit Locklypro.com/app SECTION 4.5... -
Page 24: Unlock With Qr Code
4.6 Unlock with QR Code If you have multiple Locky Guard door locks, you can use the LocklyPro app code scanner to unlock. A QR code sticker (blue color) comes together with your lock. Open the LocklyPro app and scan it to unlock. You may also generate a unique QR code via LocklyPro app for your smart lock. -
Page 25: Safe Mode - Overview
After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly Guard will disable the keypad for 20 minutes, displaying a “20” on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. - Page 26 Option 2 - LocklyPro Bluetooth App Use the app that is synced to your Lockly Guard to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you won’t be able to use this option to disable Safe Mode.
-
Page 27: Rain Mode
Like other digital electronic products water can trigger to activate the touchscreen and sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly Guard to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected. -
Page 28: Shine Mode
4.10 Shine Mode Lockly Guard touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the upper left button for 3 seconds. -
Page 29: Video Doorbell
- Ready to Talk ( 3 blinks) REMINDER: Install the provided “Please Ring Doorbell on Door Lock” plate on a clean and dry surface pointing the arrow to Lockly Guard ™ Vision to remind guests. SECTION 5.1... - Page 30 Tap the Call icon to initiate conversation. Enhanced Alert Notification Lockly Guard Vision has an enhanced alert notification feature. When someone ™ rings your doorbell and you were unable to answer, you will receive a 2nd alert notification.
- Page 31 5.1 Video Doorbell (Continued) Vision enables you to attend to your door when you are not at home. While using the app, you can use the icons below to view, initiate conversations and unlock door. Live View You can open the LocklyPro App and tap on the camera to see what Vision sees at all times.
- Page 32 5.1 Video Doorbell (Continued) Video Recording Lockly Guard Vision stores video recording on the local TF card and recording ™ can be accessed on the log history on your LocklyPro app. Vision automatically initiate video recording when below conditions take place:...
-
Page 33: Offline Access Code (Oac)
™ OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your Lockly Guard randomly generates the Offline Access Code which can be shared to your guests together ™... -
Page 34: Sub Admin Access
The Sub-Admin access is ideal for long term property leasing and Airbnb tenants. 7.1 Re-keying Lockly Guard smart lock comes with a 5-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. -
Page 35: Important Notes
You may deactivate this feature through the LocklyPro App. 9V Backup Access When your Lockly Guard is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. -
Page 36: Cleaning
9.1 Cleaning Making sure your Lockly Guard is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DON’T • Rinse the touchscreen with • Don’t use abrasives, high warm water prior to cleaning. alkaline cleaners, or gasoline to clean your lock. -
Page 37: Safety Precautions
10.1 Safety Precautions Please read all instructions carefully. Remind all Lockly Guard users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. - Page 38 FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 40 To ensure you have access to the most updated and newly added features of your Lockly Guard smart lock, please visit: www.locklypro.com/698L www.locklypro.com/698D VISION DUO (698D) | INTERCONNECTED EDITION VISION (698L) | LATCH EDITION We’re here to help! prosales@lockly.com locklypro.com/support ©...