Table of Contents
Advertisement
C. Turn on the NVR's power switch (if present). The NVR
may beep as it powers up. The Startup Wizard will
appear on-screen after a few minutes.
NOTE: The camera will make a faint clicking sound when
the power is activated. The cameras will take about one
minute after powering on to begin displaying on the monitor.
DISPLAY COMPATIBILITY: While the system boots, the
Q-See logo will appear. If the logo appears on your monitor
but goes blank, your display may not be compatible with
your NVR. This NVR requires a display capable of support-
ing 1024 x 768, 1280 x 720, 1280 x 1024, or 1920 x 1080.
Step 7: Startup Wizard
A. In order to effectively use the search functions and
maintain accurate recordings, you must complete
the Startup Wizard. Click on
Next Step
to begin.
9
Advertisement
Table of Contents
