Connect To The Router; Powering Up The Nvr & Cameras - Q-See QCN8068BA Quick Start Manual

Step 5: Connect to the Router
A. Plug the included Network (Ethernet) cable into the
Network (LAN) port on the back of the NVR.
B. Connect the other end of the cable to an open port
on your router (not included). You will hear a click
when the cable is properly connected.
8
Step 6: Powering Up the NVR &
Cameras
A. Plug the NVR power supply cable into the DC Port
on the back of the NVR.
B. Plug the NVR power supply cable or power adapter
into a surge protector (not included).