Operation - Coby CSMP162 Instruction Manual

Operation

To set up your iPod speaker system, please follow these
simple steps:
1. Carefully unpack the unit speaker, remote control,
and power cord.
2. Unwind power cord and connect to the socket on
the rear of the system. Connect the other end to your
power outlet.
3. Place the system on a stable, flat surface. Avoid plac-
ing the system in direct sunlight.
4. To turn the system on, press the POWER touch pad
on the top panel. The blue light on the underside of
the unit will illuminate.
Page 6 Coby Electronics Corporation